Pin Mount Adapters to Hitachi M4 Thread (Height extenders)

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Pin Mount Adapters to Hitachi M4 Thread (Height extenders)DESCRIPTION The pin mount adapters to M4, with standard 3. 2mm (1 8") hole in the top and M4 thread in the base are available in 4 sizes: 15 x 15mm H (low) 16 x 25mm H (medium) 16 x 38mm H (high) 16 x 55mm H (extended) They enable the use of standard pin mounts with 3. 2mm (1 8") pin on Hitachi M4 thread. Longer adapters are used for short working distances without raising the specimen stage. Made from vacuum grade aluminum with stainless steel set

Knoop 130° x 172° Rhomboidal

Line or "d" spacing for parallel line grating is 462

The PELCO® Pro Superalloy tweezers are fully non-magnetic

660-200-CU - Quantifoil®

Max EL = 350 nm

except specials which are listed accordingly

1µm for the 50µm and 2µm patterns

Cross-Sectional Sample Holder DESCRIPTION

which has a thickness of 75µm (3 mil)) and a diameter of 3

The larger the tip/shaft diameter and the greater the included angle the more robust the scribe

Two SEM starter kits available for use with JEOL and Hitachi

The latex sphere size is 0