Replacement 1340cc Shovel cast piston. +.040

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Replacement 1340cc Shovel cast piston. +.040"Standard 8. 5: 1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow

2-bank 12V 0

Note: When running the Kraus T-Rex pullback plate you can not use your stock Key Switch/Steering Lock so you will need to relocate the switch or fully remove it with an optional CVO Ignition Flash done by us at CSD

1” handlebar clamping area

recharges and then keeps the battery 100% ready

Without hose

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22

Coilover monotube construction

Kit includes a drilling and cutting template

No special or complicated heated grip set installation required

- 294mm wide

How to wrap the grips:- Remove part of the tape cover and start wrapping by placing the thin end of the grip on the far end of the handlebar - Press the grip so that it sticks and start wrapping by removing a part of the tape cover as you go - Wrap till the near end and cut the extra grip if necessary with a knife or a blade - Seal the end using the extra glue provided in the box - Enjoy your ride

39897-02 is not available through Motorcycle Storehouse

Exchange/Return Notes