Pro-Ject Strobe-It Universal Strobe Disc 33.3 45 78 RPM & Alignment Gauge

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Pro-Ject Strobe-It Universal Strobe Disc 33.3 45 78 RPM & Alignment GaugeThe Strobe It is a 12" diameter double sided setup tool, on one side is a strobe disc and on the other is a cartridge alignment gauge. This strobe disc side has markings for 33. 3, 45 and 78 rpm and should be used with a turntable speed 50Hz strobe light (not supplied) or the flickering obtained from some normal household lighting (ideally a basic incandescent bulb). The Alignment protractor side features null points of 66. 04mm and 120. 99mm

featuring oversized cores enabling colossal overload margins (30 volts - well above the level any pre amplifier will ever experience

Power: 2x12 Watts Class A into 8 Ohms

The LEAK CDT is compatible with FAT16 and FAT32 formatted devices and will playback media in the format of WMA

The attention to detail doesn’t finish with the design

so instead here a long throw ten inch bass unit is used in a substantial reflex (floor ported) enclosure and is driven by a dedicated low frequency DSP controlled amplifier

Driver Size: 250 mm/10 inches

Please note that the RCA sockets will need to be soldered to the arm wiring and the ground wire is normally connected via a circa 4mm female spade connector to the cutout out in the metal work (which already has bare metal on it)

5mm in height or more

The excellent tweeter used in this design really takes the performance to the next level - all the 'hi-fi' attributes are there as you'd expect but what really matters is the naturalness and feeling of acoustic that this brings

headphone and speaker cables

For those unfamiliar with the Hyperspace turntable design

so they can all fit the Stylus 5

Exchange/Return Notes