Patterned Wire - Brass - Double Serpentine Hammered with Edging 22 gauge Dead Soft - 6

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Patterned Wire - Brass - Double Serpentine Hammered with Edging 22 gauge Dead Soft - 6" MinPatterned Wire Double Serpentine Hammered with Edging This elegant patterned brass wire can be embedded in bronze clay and fired in place. Can also be soldered using low temperature silver solder to incorporate with other brass stampings, sheet metals and other materials. This product is sold in 6" lengths. Due to variations in patterns, we do not guarantee a complete end to end pattern. When ordering more than 6", we always try to send out one piece;

Purchase prepared kiln wash and mix with water as indicated on the package to a creamy consistency

Wire - Argentium® Sterling - Dead Soft

The square jaws are a contiunuous square mandrel as opposed to being tapered

With a touch less tin

Paintstiks can be spread or blended and used in conjunction with conventional oil paint

This is the replacement muffle for the SC3 120 Volt kiln

The container that the powder comes in is deliberately larger than needed so it can be reused afterwards

and ceramic glazes

The plastic gauges tend to have sizes on only whole and half sizes but are most economical

Check out Wanaree's eBook below for inspiration and the infinite possibilities of Wanaree's textures

UltraLite Studio Kiln (120V)

pendants or other larger components